 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CD4016BC Quad Bilateral Switch November 1983 Revised March 2002 CD4016BC Quad Bilateral Switch General Description The CD4016BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4066BC. s Extremely high control input impedance: 1012 (typ) s Low crosstalk between switches: -50 dB (typ.) @ fIS = 0.9 MHz, RL = 1 k s Frequency response, switch "ON": 40 MHz (typ) Features s Wide supply voltage range: 3V to 15V s Wide range of digital and analog switching: 7.5 VPEAK s "ON" Resistance for 15V operation: 400 (typ) s Matched "ON" Resistance over 15V signal input: Applications * Analog signal switching/multiplexing Signal gating Squelch control Chopper Modulator/Demodulator Commutating switch * Digital signal switching/multiplexing * CMOS logic implementation * Analog-to-digital/digital-to-analog conversion * Digital control of frequency, impedance, phase, and analog-signal gain RON = 10 (typ) s High degree of linearity: 0.4% distortion (typ) @ fIS = 1 kHz, VIS = 5 Vp-p, VDD-VSS = 10V, RL = 10 k s Extremely low "OFF" switch leakage: 0.1 nA (typ.) @ VDD - VSS = 10V TA = 25C Ordering Code: Order Number CD4016BCM CD4016BCN Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the letter suffix "X" to the ordering code. Connection Diagram Schematic Diagram (c) 2002 Fairchild Semiconductor Corporation DS005661 www.fairchildsemi.com CD4016BC Absolute Maximum Ratings(Note 1) (Note 2) VDD Supply Voltage VIN Input Voltage TS Storage Temperature Range Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (Soldering, 10 seconds) 260C 700 mW 500 mW Recommended Operating Conditions (Note 2) VDD Supply Voltage VIN Input Voltage TA Operating Temperature Range 3V to 15V 0V to VDD -0.5V to +18V -0.5V to VDD + 0.5V -65C to + 150C -55C to +125C Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Recommended Operating Conditions" and "Electrical Characteristics" provide conditions for actual device operation. Note 2: VSS = 0V unless otherwise specified. DC Electrical Characteristics (Note 2) Symbol IDD Parameter Quiescent Device Current Signal Inputs and Outputs RON "ON" Resistance RL = 10k to (VDD - V SS)/2 VC = VDD, VIS = VSS or VDD VDD = 10V VDD = 15V RL = 10k to (VDD - V SS)/2 VC = VDD VDD = 10V, VIS = 4.75 to 5.25V VDD = 15V, VIS = 7.25 to 7.75V RON "ON" Resistance Between any 2 of 4 Switches (In Same Package) IIS Input or Output Leakage Switch "OFF" Control Inputs VILC LOW Level Input Voltage VIS = VSS and VDD VOS = VDD and VSS IIS = 10 A VDD = 5V VDD = 10V VDD = 15V VIHC HIGH Level Input Voltage VDD = 5V VDD = 10V VDD = 15V (Note 3) and Table 1 IIN Input Current VCC - VSS = 15V VDD VIS VSS VDD VC VSS Note 3: If the switch input is held at VDD, VIHC is the control input level that will cause the switch output to meet the standard "B" series VOH and IOH output levels. If the analog switch input is connected to VSS, VIHC is the control input level -- which allows the switch to sink standard "B" series |IOH|, HIGH level current, and still maintain a VOL "B" series. These currents are shown in Table 1. Conditions VDD = 5V, VIN = VDD or VSS VDD = 10V, VIN = VDD or VSS VDD = 15V, VIN = V DD or VSS -55C Min Max 0.25 0.5 1.0 Min 25C Typ 0.01 0.01 0.01 Max 0.25 0.5 1.0 +125C Min Max 7.5 15 30 Units A A A 600 360 250 200 660 400 960 600 1870 775 850 400 2000 850 2600 1230 RL = 10k to (VDD - V SS)/2 VC = VDD, VIS = VSS to VDD VDD = 10V VDD = 15V VC = 0, VDD = 15V VIS = 0V or 15V, VOS = 15V or 0V 50 15 10 0.1 50 500 nA 0.9 0.9 0.9 3.5 7.0 11.0 0.1 3.5 7.0 11.0 10-5 0.7 0.7 0.7 3.5 7.0 11.0 0.1 0.5 0.5 0.5 V V V V V V 1.0 A www.fairchildsemi.com 2 CD4016BC AC Electrical Characteristics Symbol tPHL, tPLH Parameter Propagation Delay Time Signal Input to Signal Output (Note 4) Conditions VC = VDD, CL = 50 pF, (Figure 1) RL = 200k VDD = 5V VDD= 10V VDD = 15V 58 27 20 20 18 17 15 11 10 0.4 100 50 40 50 40 35 40 25 22 ns ns ns ns ns ns ns ns ns % Min Typ Max Units TA = 25C, tr = tf = 20 ns and VSS = 0V unless otherwise specified tPZH, tPZL Propagation Delay Time Control Input to Signal Output HIGH Impedance to Logical Level RL = 1.0 k, CL = 50 pF, (Figure 2, Figure 3) VDD = 5V VDD = 10V VDD = 15V RL = 1.0 k, CL = 50 pF, (Figure 2, Figure 3) VDD = 5V VDD = 10V VDD = 15V VC = VDD = 5V, VSS = -5 RL = 10 k, VIS = 5 VP-P, f = 1 kHz, (Figure 4) tPHZ, tPLZ Propagation Delay Time Control Input to Signal Output Logical Level to HIGH Impedance Sine Wave Distortion Frequency Response -- Switch "ON" (Frequency at -3 dB) VC = VDD = 5V, VSS = -5V, RL = 1 k, VIS = 5 VP-P, 20 Log10 V OS/VOS (1 kHz) -dB, (Figure 4) 40 MHz Feedthrough -- Switch "OFF" (Frequency at -50 dB) VDD = 5V, VC = VSS = -5V, RL = 1 k, VIS = 5 VP-P, 20 Log10 (VOS/VIS) = -50 dB, (Figure 4) 1.25 MHz Crosstalk Between Any Two Switches (Frequency at -50 dB) VDD = VC(A) = 5V; VSS = VC(B) = -5V, RL = 1 kVIS(A) = 5 VP-P, 20 Log10 (VOS(B)/VOS(A) ) = -50 dB, (Figure 5) 0.9 MHz Crosstalk; Control Input to Signal Output Maximum Control Input VDD = 10V, RL = 10 k RIN = 1 k, VCC = 10V Square Wave, CL = 50 pF (Figure 6) RL = 1 k, CL = 50 pF, (Figure 7) VOS(f) = 1/2 VOS(1 kHz) VDD = 5V VDD = 10V VDD = 15V 150 mVP-P 6.5 8.0 9.0 4 4 0.2 5 7.5 MHz MHz MHz pF pF pF pF CIS COS CIOS CIN Signal Input Capacitance Signal Output Capacitance Feedthrough Capacitance Control Input Capacitance VDD = 10V VC = 0V Note 4: AC Parameters are guaranteed by DC correlated testing. Note 5: These devices should not be connected to circuits with the power "ON". Note 6: In all cases, there is approximately 5 pF of probe and jig capacitance on the output; however, this capacitance is included in CL wherever it is specified. Note 7: VIS is the voltage at the in/out pin and VOS is the voltage at the out/in pin. VC is the voltage at the control input. 3 www.fairchildsemi.com CD4016BC AC Test Circuits and Switching Time Waveforms FIGURE 1. tPLH, tPLH Propagation Delay Time Control to Signal Output FIGURE 2. tPZH, tPHZ Propagation Delay Time Control to Signal Output FIGURE 3. tPZH, tPHZ Propagation Delay Time Control to Signal Output VC = VDD for distortion and frequency response tests VC = VSS for feedthrough test FIGURE 4. Sine Wave Distortion, Frequency Response and Feedthrough www.fairchildsemi.com 4 CD4016BC AC Test Circuits and Switching Time Waveforms (Continued) FIGURE 5. Crosstalk Between Any Two Switches FIGURE 6. Crosstalk -- Control to Input Signal Output FIGURE 7. Maximum Control Input Frequency 5 www.fairchildsemi.com CD4016BC TABLE 1. CD4016B Switch Test Conditions for VIHC Temperature Range VDD 5 5 COMMERCIAL 10 10 15 15 VIS Switch Input IIS (mA) Switch Output VOS(V) -40C 0 5 0 10 0 15 0.2 25C 0.16 +85C 0.12 Min 4.6 Max 0.4 0.5 -0.2 0.5 -0.16 0.4 -0.12 0.3 -0.5 1.4 -0.4 1.2 -0.3 1.0 9.5 1.5 13.5 -1.4 -1.2 -1.0 Typical Performance Characteristics 'ON' Resistance vs. Signal Voltage TA = 25C 'ON' Resistance Temperature Variation for VDD - VSS = 10V 'ON' Resistance Temperature Variation for VDD - VSS = 15V www.fairchildsemi.com 6 CD4016BC Typical Applications 4 Input Multiplexer Sample/Hold Amplifier Special Considerations The CD4016B is composed of 4, two-transistor analog switches. These switches do not have any linearization or compensation circuitry for "RON" as do the CD4066B's. Because of this, the special operating considerations for the CD4066B do not apply to the CD4016B, but at low supply voltages, 5V, the CD4016B's On Resistance becomes non-linear. It is recommended that at 5V, voltages on the in/out pins be maintained within about 1V of either VDD or VSS; and that at 3V the voltages on the in/out pins should be at VDD or VSS for reliable operation. 7 www.fairchildsemi.com CD4016BC Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 8 CD4016BC Quad Bilateral Switch Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com |
Price & Availability of CD4016BC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |